The BIMED, ATEX Cable glands are intended for universal use covering all explsion protective techniques Ex-e Ex-d Ex-tb Ex-tc, Ex-n. Suitable for operation in Zone 1, Zone 2, Zone 21, and Zone 22 Areas. All cable glands and accessoires are unique to the market; triple certified, holding ATEX, IECEx and DNV-GL Marine Approval.
Important Selection for Cable Glands
- Protection type exd,exe or universal
- Cable type – Normal non-armored cable e.g. with pvc or xlpe shell – Armored cable, e.g. with SWA or SWB protecvive cover
- Cable outside diameter (and inside diameter for armored cables)
- Threated (e.g. ISO m20 or NTP 1/2) or through holes in the enclosure
- Base material of the housing/enclosure (this is an important feature because of galvanic corrosion)
Please call or email and our engineers will assist you to select the right gland for your application. Please select below the cable type you intent to use, please choose between armored and non-armored.
ATEX cable gland Ex-e Ex-d
for armored cable
ATEX cable gland Ex-e Ex-d for
non-armored cable
Cable glands are used in ATEX terminal boxes, control units, distribution panels and any other electric equipment that is used in an explosion harardous environment. They are available for different cable types and housing/enclosure materials. 
Benefits
- Non-armored cables Ex-e/Ex-d
- PVC cable
- XLPE cable
- Armored cables Ex-e/Ex-d
- SWA cable (steel wire armor)
- SWB cable (steel wire braid)
- STA cable (steel tape armor)
- Certified Ex d, Ex e, and Ex tb
- Suitable for operation in Zones 1, 2, 21, and 22
For non-armored cables
The ATEX / IECEx Cable Glands can be used indoor and outdoor in Zone 1, Zone 2, Zone 21, and Zone 22 hazardous areas. They are intended for use with armored or non-armored cables providing a combined flameproof seal and environmental seal on the cable outer sheath. They are typically installed in metal Ex e enclosures or as safe cable entry for electrical ATEX equipment. Compound glands are available on request these glands are only used for gasgroup IIC applications and large (>2 litre) flameproof housings that are located in zone 1.
The BIMED, ATEX Cable glands are intended for universal use covering all explsion protective techniques (Ex-e Ex-d Ex-ta Ex-tb, Ex-n Suitable for operation in Zone 1, 2, 21, and 22 areas. Please select below the cable type you intent to use, please choose between armored and non-armored
Non-armored cables Ex-e/Ex-d Armored cables Ex-e/Ex-d
ATEX cable gland Ex-e Ex-d
for armored cable
ATEX cable gland Ex-e Ex-d for
non-armored cable
Cable glands are used in ATEX terminal boxes, control units, distribution panels and any other electric equipment that is used in an explosion harardous environment. They are available for different cable types and housing/enclosure materials.
Benefits
- Non-armored cables Ex-e/Ex-d
- PVC cable
- XLPE cable
- Armored cables Ex-e/Ex-d
- SWA cable (steel wire armor)
- SWB cable (steel wire braid)
- STA cable (steel tape armor)
- Certified Ex d, Ex e, and Ex tb
- Suitable for operation in Zones 1, 2, 21, and 22
For non-armored cables
The ATEX / IECEx Cable Glands can be used indoor and outdoor in Zone 1, Zone 2, Zone 21, and Zone 22 hazardous areas. They are intended for use with armored or non-armored cables providing a combined flameproof seal and environmental seal on the cable outer sheath. They are typically installed in metal Ex e enclosures or as safe cable entry for electrical ATEX equipment.
Compound glands are available on request these glands are only used for gasgroup IIC applications and large (>2 litre) flameproof housings that are located in zone 1.
